LED Marker & Position Lamps
Side position lamp with direction indicator
W157 lamps are position lamps combined with a retro-reflector. These universal LED lamps with single light source of a position light/ clearance marker light. A neon-effect light, which produces an eye-catching glow, gives a unique character to W157 lamps. They can be mounted both vertically and horizontally. Due to the pad protecting the vehicle’s painted surface, lamps can be mounted directly on the vehicle or using a hanger a few centimetres apart from the vehicle.
Clear LED Front Marker Lamp
Clear LED front marker lamp. Multivolt 12 - 24 volt, sealed electronics, 20cm hardwired cable. Current draw at 13.08 volts - 0.05 Amps.
Red LED Rear Marker Lamp
Red LED rear marker lamp. Multivolt 12 - 24 volt, sealed electronics, 20cm hardwired cable. Current draw at 13.08 volts - 0.05 Amps.
Amber LED Side Marker Lamp
Amber LED side marker lamp. Multivolt 12 - 24 volt, sealed electronics, 20cm hardwired cable. Current draw at 13.08 volts - 0.05 Amps.
10 - 30 Volt Rubber LED End Outline Marker
10 - 30 volt rubber LED end outline marker lamp containing 10 LEDs on each side. One side is clear, the other red. Current consumption across all voltages - 100mA. 'E' marked. Sold in pairs - 1 x left, 1 x right.
10 - 30 Volt Rubber LED End Outline Marker
10 - 30 volt rubber LED end outline marker lamp containing 10 LEDs on each side. One side is clear, the other red. Current consumption across all voltages - 100mA. 'E' marked. Sold in pairs - 1 x left, 1 x right.
10 - 30 Volt Rubber LED End Outline Marker
10 - 30 volt rubber LED end outline marker lamp containing 10 LEDs on each side. One side is clear, the other red. Current consumption across all voltages - 100mA. 'E' marked.
10 - 30 Volt DC Red LED Rear Marker
10 - 30 volt DC red LED rear marker with 5 light emitting diodes and rear entry fly-leads. It has a current consumption of 400mA across all voltages.
10 - 30 Volt DC LED Side Marker Lamp
10 - 30 volt DC LED side marker with 5 light emitting diodes and rear entry fly-leads. It has a current consumption of 400mA across all voltages.
24 Volt Clear LED Front Marker Lamp
24 volt clear LED front marker lamp with reflex reflector. Supplied with connection leads fitted. 'E' approved
24 Volt Amber LED Side Marker Lamp
24 volt amber LED side marker lamp with reflex reflector. Supplied with connection leads fitted. 'E' approved.
24 Volt Red LED Rear Marker Lamp
24 volt red LED rear marker lamp with reflex reflector. Supplied with connection leads fitted. 'E' approved.
24 Volt Amber 2 LED Side Marker Lamp
24 volt amber 2 LED side marker lamp mounted on a fixing bracket. Current draw at 24v - 50mA. 'E' approved.
24 Volt Red LED Rear Marker
Red 24 volt LED rear marker made from ABS polycarbonate with a rubber base. 6 fully waterproofed LEDs. Current draw 250mA. Simple 2 point fixing with centres at 70mm. DOT/SAE approved.
12 Volt Red LED Rear Marker
Red 12 volt LED rear marker made from ABS polycarbonate with a rubber base. 6 fully waterproofed LEDs. Current draw 500mA. Simple 2 point fixing with centres at 70mm. DOT/SAE approved.
